Platinum Package

• 2 visits per 6 months apart
• Free service calls
• 20% any service repair needed.
• Take readings on refrigerant levels and visually inspect for any refrigerant leaks, give proper recommendation
• Draw readings of compressor capacitor and outdoor fan motor for proper operation.
• Inspect compressor’s contactor to make sure is make good connection.
• Visually inspect condenser for debris and dirt built up around coils, rinse them off in needed and water available close to unit outside.
• Inspect thermostat functions and ensure accuracy for most efficient operation.
• Inspect ducts in attic if access available and test air flow capacity throughout the system.
• Check return and supply temperature differentials to make sure they are within proper conditions.
• Check superheat temperature at condenser if orifice at air handler meters refrigerant to ensure no flooding to compressor and overworking system.
• Check sub cooling temperature at condenser if TXV valve at air handler metering refrigerant to ensure system has sufficient refrigerant to be able to cool home at peak hot weather.
• Check indoor coil for proper air circulation and not restricting air flow which could cause very high electric bills.
• Collect amperage draw from indoor blower motor to make sure it’s still efficient.
• Flush out main drain line, vacuum it out and add bleach tablets, to prevent premature water leaking on floor.
• Add up to 1 lb. of refrigerant if needed worth ($50)
• Spray indoor coils with biodegradable solution if coil less than 30% impacted to keep coils from restricting air flow.
• Keep giving tips and advise on how to keep improving the life of the system after tune up has been performed.